#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.53 for fGIS 0.0.1.
+# Generated by GNU Autoconf 2.56 for fGIS 0.0.2.
#
# Report bugs to <dron@remotesensing.org>.
#
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-
-# Find the correct PATH separator. Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
- UNAME=${UNAME-`uname 2>/dev/null`}
- case X$UNAME in
- *-DOS) lt_cv_sys_path_separator=';' ;;
- *) lt_cv_sys_path_separator=':' ;;
- esac
- PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-# NLS nuisances.
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
as_unset=false
fi
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
- { $as_unset LANG || test "${LANG+set}" != set; } ||
- { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
- { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
- { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
- { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
- { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
- { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
- { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
- { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
+
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conftest.sh
- echo "exit 0" >>conftest.sh
- chmod +x conftest.sh
- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
- rm -f conftest.sh
+ rm -f conf$$.sh
fi
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
CONFIG_SHELL=$as_dir/$as_base
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$0" ${1+"$@"}
*) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
+ PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+
+EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
+fi
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
# Name of the host.
# Initializations.
#
ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
cross_compiling=no
subdirs=
MFLAGS=
# Identity of this package.
PACKAGE_NAME='fGIS'
PACKAGE_TARNAME='fgis'
-PACKAGE_VERSION='0.0.1'
-PACKAGE_STRING='fGIS 0.0.1'
+PACKAGE_VERSION='0.0.2'
+PACKAGE_STRING='fGIS 0.0.2'
PACKAGE_BUGREPORT='dron@remotesensing.org'
# Factoring default headers for most tests.
# include <unistd.h>
#endif"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL YACC ALLOCA LIBOBJS POW_LIB FGIS_CONFDIR FGIS_LIBDIR FGIS_SCRIPTDIR LIBEPP TCLHDIR TCLHDIRDASHI TCL_LIBRARY TCL_DEFS TCL_DELETEME TCL_DBGX TCL_EXEC_PREFIX TCL_SHLIB_LD SHLIB_SUFFIX TCL_LD_FLAGS TCL_BUILD_LIB_SPEC TCL_LIB_SPEC TCL_SHARED_LIB_SUFFIX TCL_INC_DIR TCL_PACKAGE_PATH TKHDIRDASHI TK_VERSION TK_DEFS TK_DBGX TK_XINCLUDES TK_XLIBSW TK_BUILD_LIB_SPEC TK_LIB_SPEC TK_INC_DIR GDAL_INC LTLIBOBJS'
+ac_subst_files=''
# Initialize some variables set by options.
ac_init_help=
{ (exit 1); exit 1; }; }
fi
fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
ac_env_build_alias_set=${build_alias+set}
ac_env_build_alias_value=$build_alias
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures fGIS 0.0.1 to adapt to many kinds of systems.
+\`configure' configures fGIS 0.0.2 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of fGIS 0.0.1:";;
+ short | recursive ) echo "Configuration of fGIS 0.0.2:";;
esac
cat <<\_ACEOF
--enable-shared=PKGS build shared libraries default=yes
--enable-static=PKGS build static libraries default=yes
--enable-fast-install=PKGS optimize for fast installation default=yes
- --disable-dependency-tracking Speeds up one-time builds
- --enable-dependency-tracking Do not reject slow dependency extractors
--disable-libtool-lock avoid locking (might break parallel builds)
Optional Packages:
--with-pic try to use only PIC/non-PIC objects default=use both
--with-x use the X Window System
--with-tclinclude=DIR directory where tcl private headers are
- --with-tcl directory containing tcl configuration (tclConfig.sh)
- --with-tkinclude directory where tk private headers are
- --with-tk directory containing tk configuration (tkConfig.sh)
+ --with-tcl=DIR directory containing tcl configuration (tclConfig.sh)
+ --with-tkinclude=DIR directory where tk private headers are
+ --with-tk=DIR directory containing tk configuration (tkConfig.sh)
+ --with-gdal[=DIR] path to GDAL build tree
Some influential environment variables:
CC C compiler command
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-fGIS configure 0.0.1
-generated by GNU Autoconf 2.53
+fGIS configure 0.0.2
+generated by GNU Autoconf 2.56
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by fGIS $as_me 0.0.1, which was
-generated by GNU Autoconf 2.53. Invocation command line was
+It was created by fGIS $as_me 0.0.2, which was
+generated by GNU Autoconf 2.56. Invocation command line was
$ $0 $@
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
ac_sep=
-for ac_arg
+ac_must_keep_next=false
+for ac_pass in 1 2
do
- case $ac_arg in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n ) continue ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- ac_sep=" " ;;
- esac
- # Get rid of the leading space.
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# Save into config.log some information that might help in debugging.
{
echo
+
cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
esac;
}
echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
if test -s confdefs.h; then
cat <<\_ASBOX
## ----------- ##
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h
+ sed "/^$/d" confdefs.h | sort
echo
fi
test "$ac_signal" != 0 &&
-am__api_version="1.6"
+
+am__api_version="1.4"
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
-echo timestamp > conftest.file
+echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t $srcdir/configure conftestfile`
fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
{ (exit 1); exit 1; }; }
fi
- test "$2" = conftest.file
+ test "$2" = conftestfile
)
then
# Ok.
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
+rm -f conftest*
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
test "$program_prefix" != NONE &&
program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
rm conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$AWK" && break
-done
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
all:
- @echo 'ac_maketemp="${MAKE}"'
+ @echo 'ac_maketemp="$(MAKE)"'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
- # test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# Define the identity of the package.
- PACKAGE=fgis
- VERSION=0.0.1
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
fi
+rm -f conftest.make
fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
fi
- STRIP=$ac_ct_STRIP
+
+PACKAGE=
+
+VERSION=
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal-${am__api_version}
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
else
- STRIP="$ac_cv_prog_STRIP"
+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
+
+echo "$as_me:$LINENO: checking for working autoconf" >&5
+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
fi
+echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake-${am__api_version}
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+echo "$as_me:$LINENO: checking for working autoheader" >&5
+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
+echo "$as_me:$LINENO: checking for working makeinfo" >&5
+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-# Add the stamp file to the list of files AC keeps track of,
-# along with our hook.
-ac_config_headers="$ac_config_headers include/config.h"
+ ac_config_headers="$ac_config_headers include/config.h"
+ ac_config_commands="$ac_config_commands default-1"
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
- DEPDIR=.deps
-else
- # MS-DOS does not allow filenames that begin with a dot.
- DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
- @echo done
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
- set dummy "$as_dir/$ac_word" ${1+"$@"}
- shift
- ac_cv_prog_CC="$@"
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
# Be careful to initialize this variable, since it used to be cached.
# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
ac_cv_exeext=
-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
- ls a.out conftest 2>/dev/null;
- ls a.* conftest.* 2>/dev/null`; do
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
- a.out ) # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
- export ac_cv_exeext
- break;;
- * ) break;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
esac
done
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
-echo "$as_me: error: C compiler cannot create executables" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
fi
cross_compiling=yes
else
{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&5
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
-rm -f a.out a.exe conftest$ac_cv_exeext
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
export ac_cv_exeext
break;;
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
(exit $ac_status); }; then
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS=
fi
fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
do
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
:
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
break
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- echo '#include "conftest.h"' > conftest.c
- echo 'int i;' > conftest.h
- echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=conftest.c object=conftest.o \
- depfile=conftest.Po tmpdepfile=conftest.TPo \
- $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
- grep conftest.h conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
# Find the correct PATH separator. Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <assert.h>
Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
:
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Broken: fails on valid input.
continue
fi
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
continue
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Passes both tests.
ac_preproc_ok=:
break
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <assert.h>
Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
:
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Broken: fails on valid input.
continue
fi
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
continue
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
# Passes both tests.
ac_preproc_ok=:
break
if $ac_preproc_ok; then
:
else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
echo "$as_me:$LINENO: checking for ANSI C header files" >&5
echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
if test "${ac_cv_header_stdc+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_header_stdc=no
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <string.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
+ $EGREP "memchr" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
+ $EGREP "free" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ctype.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
|| ('j' <= (c) && (c) <= 'r') \
|| ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
fi
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_Header=no"
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4177 "configure"' > conftest.$ac_ext
+ echo '#line 4218 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
lt_cv_cc_needs_belf=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
lt_cv_cc_needs_belf=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
lt_cv_prog_cc_pic_works=no
fi
LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
lt_cv_prog_cc_static_works=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
-if { (eval echo configure:4713: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:4751: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s out/conftest.err; then
ac_objext=lo
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_objext="$save_objext"
compiler_rtti_exceptions=no
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
-f = shl_load;
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dld_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
-f = dlopen;
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dl_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_svld_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dld_link ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_dld_dld_link=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_dld_dld_link=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 6511 "configure"
+#line 6547 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 6609 "configure"
+#line 6645 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
- set dummy "$as_dir/$ac_word" ${1+"$@"}
- shift
- ac_cv_prog_CC="$@"
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS=
fi
fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
do
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
:
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_declaration
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
break
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- echo '#include "conftest.h"' > conftest.c
- echo 'int i;' > conftest.h
- echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=conftest.c object=conftest.o \
- depfile=conftest.Po tmpdepfile=conftest.TPo \
- $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
- grep conftest.h conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- done
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
- cd ..
- rm -rf conftest.dir
else
- am_cv_CC_dependencies_compiler_type=none
-fi
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
all:
- @echo 'ac_maketemp="${MAKE}"'
+ @echo 'ac_maketemp="$(MAKE)"'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
# First, try using that file with no special directory specified.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <X11/Intrinsic.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_x_includes=
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
for ac_dir in $ac_x_header_dirs; do
if test -r "$ac_dir/X11/Intrinsic.h"; then
ac_x_includes=$ac_dir
LIBS="-lXt $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <X11/Intrinsic.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_x_libraries=
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
LIBS=$ac_save_LIBS
for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <alloca.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_working_alloca_h=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_working_alloca_h=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# endif
#endif
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_func_alloca_works=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_alloca_works=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "webecray" >/dev/null 2>&1; then
+ $EGREP "webecray" >/dev/null 2>&1; then
ac_cv_os_cray=yes
else
ac_cv_os_cray=no
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_var=no"
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
int
find_stack_direction ()
{
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_c_stack_direction=-1
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_header_stdc=no
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <string.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
+ $EGREP "memchr" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
+ $EGREP "free" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <ctype.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
|| ('j' <= (c) && (c) <= 'r') \
|| ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
fi
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
# Checks for typedefs, structures, and compiler characteristics.
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
-else
- echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
- *)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
if test "${ac_cv_c_const+set}" = set; then
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_c_const=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_c_const=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_type_size_t=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_type_size_t=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <sys/types.h>
#include <time.h>
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_struct_tm=time.h
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_struct_tm=sys/time.h
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_error_at_line=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_error_at_line=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
done
-echo "$as_me:$LINENO: checking for working malloc" >&5
-echo $ECHO_N "checking for working malloc... $ECHO_C" >&6
-if test "${ac_cv_func_malloc_works+set}" = set; then
+echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
+echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6
+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
- ac_cv_func_malloc_works=no
+ ac_cv_func_malloc_0_nonnull=no
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#if STDC_HEADERS || HAVE_STDLIB_H
# include <stdlib.h>
#else
char *malloc ();
#endif
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_func_malloc_works=yes
+ ac_cv_func_malloc_0_nonnull=yes
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
-ac_cv_func_malloc_works=no
+ac_cv_func_malloc_0_nonnull=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_func_malloc_works" >&5
-echo "${ECHO_T}$ac_cv_func_malloc_works" >&6
-if test $ac_cv_func_malloc_works = yes; then
+echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
+echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6
+if test $ac_cv_func_malloc_0_nonnull = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_MALLOC 1
_ACEOF
+else
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_MALLOC 0
+_ACEOF
+
+ LIBOBJS="$LIBOBJS malloc.$ac_objext"
+
+cat >>confdefs.h <<\_ACEOF
+#define malloc rpl_malloc
+_ACEOF
+
fi
+
+
for ac_header in stdlib.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_var=no"
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
/* malloc might have been renamed as rpl_malloc. */
#undef malloc
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_func_mmap_fixed_mapped=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <sys/types.h>
#include <signal.h>
#ifdef signal
void (*signal ()) ();
#endif
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_type_signal=void
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_type_signal=int
fi
rm -f conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_func_lstat_dereferences_slashed_symlink=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
else
# If the `ln -s' command failed, then we probably don't even
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_func_stat_empty_string_bug=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
double strtod ();
int
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
( exit $ac_status )
ac_cv_func_strtod=no
fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pow (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char pow ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_pow) || defined (__stub___pow)
choke me
#else
-f = pow;
+char (*f) () = pow;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
ac_cv_func_pow=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_pow=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS="-lm $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char pow ();
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
int
main ()
{
ac_cv_lib_m_pow=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_lib_m_pow=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_var=no"
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char _doprnt ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub__doprnt) || defined (__stub____doprnt)
choke me
#else
-f = _doprnt;
+char (*f) () = _doprnt;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
ac_cv_func__doprnt=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func__doprnt=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
eval "$as_ac_var=no"
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- FGIS_CONFIG=$"$sysconfdir"
+ FGIS_CONFDIR=$"$sysconfdir"
test "x$prefix" = xNONE && prefix="$ac_default_prefix"
test "x$exec_prefix" = xNONE && exec_prefix="${prefix}"
- FGIS_CONFIG=`eval echo $FGIS_CONFIG`
- FGIS_CONFIG=`eval echo $FGIS_CONFIG`
+ FGIS_CONFDIR=`eval echo $FGIS_CONFDIR`
+ FGIS_CONFDIR=`eval echo $FGIS_CONFDIR`
cat >>confdefs.h <<_ACEOF
-#define FGIS_CONFIG "$FGIS_CONFIG"
+#define FGIS_CONFDIR "$FGIS_CONFDIR"
_ACEOF
-FGIS_CONFIG=$FGIS_CONFIG
+FGIS_CONFDIR=$FGIS_CONFDIR
- FGIS_SCRIPTS=$"$libdir/fgis/tcl"
+ FGIS_SCRIPTDIR=$"$libdir/fgis/tcl"
test "x$prefix" = xNONE && prefix="$ac_default_prefix"
test "x$exec_prefix" = xNONE && exec_prefix="${prefix}"
- FGIS_SCRIPTS=`eval echo $FGIS_SCRIPTS`
- FGIS_SCRIPTS=`eval echo $FGIS_SCRIPTS`
+ FGIS_SCRIPTDIR=`eval echo $FGIS_SCRIPTDIR`
+ FGIS_SCRIPTDIR=`eval echo $FGIS_SCRIPTDIR`
-FGIS_SCRIPTS=$FGIS_SCRIPTS
+FGIS_SCRIPTDIR=$FGIS_SCRIPTDIR
echo $ECHO_N "checking tclInt.h usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <tclInt.h>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking tclInt.h presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <tclInt.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: tclInt.h: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: tclInt.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: tclInt.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: tclInt.h: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: tclInt.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: tclInt.h: present but cannot be compiled" >&5
echo "$as_me: WARNING: tclInt.h: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: tclInt.h: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: tclInt.h: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: tclInt.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: tclInt.h: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: tclInt.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for tclInt.h" >&5
echo $ECHO_N "checking for tclInt.h... $ECHO_C" >&6
+
+tcl_missing_msg="
+ ERROR: Can't find Tcl headers or library. See README for information
+ on how to obtain Tcl. If Tcl is installed, see INSTALL on how to tell
+ configure where Tcl is installed.
+"
+
if test x"$no_tcl" = x"true" ; then
- echo " ERROR: Can't find Tcl headers or library."
- echo " See README for information on how to obtain Tcl."
- echo " If Tcl is installed, see INSTALL on how to tell"
- echo " configure where Tcl is installed."
- exit 1
+ { { echo "$as_me:$LINENO: error: $tcl_missing_msg" >&5
+echo "$as_me: error: $tcl_missing_msg" >&2;}
+ { (exit 1); exit 1; }; }
fi
#
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char Tcl_CreateCommand (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char Tcl_CreateCommand ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_Tcl_CreateCommand) || defined (__stub___Tcl_CreateCommand)
choke me
#else
-f = Tcl_CreateCommand;
+char (*f) () = Tcl_CreateCommand;
+#endif
+#ifdef __cplusplus
+}
#endif
+int
+main ()
+{
+
;
return 0;
}
ac_cv_func_Tcl_CreateCommand=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_cv_func_Tcl_CreateCommand=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
echo $ECHO_N "checking tk.h usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
$ac_includes_default
#include <tk.h>
_ACEOF
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_compiler=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
echo $ECHO_N "checking tk.h presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <tk.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
- egrep -v '^ *\+' conftest.er1 >conftest.err
+ grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
- cat conftest.$ac_ext >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: WARNING: tk.h: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: tk.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:$LINENO: WARNING: tk.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: tk.h: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: tk.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
no:yes )
{ echo "$as_me:$LINENO: WARNING: tk.h: present but cannot be compiled" >&5
echo "$as_me: WARNING: tk.h: present but cannot be compiled" >&2;}
{ echo "$as_me:$LINENO: WARNING: tk.h: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: tk.h: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:$LINENO: WARNING: tk.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: tk.h: proceeding with the preprocessor's result" >&2;};;
+echo "$as_me: WARNING: tk.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
echo "$as_me:$LINENO: checking for tk.h" >&5
echo $ECHO_N "checking for tk.h... $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
-#include "confdefs.h"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char Tk_Init (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char Tk_Init ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-# ifdef __cplusplus
- extern "C"
-# endif
- int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_Tk_Init) || defined (__stub___Tk_Init)
choke me
#else
-f = Tk_Init;
+char (*f) () = Tk_Init;
#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_Tk_Init=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_Tk_Init=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_Tk_Init" >&5
+echo "${ECHO_T}$ac_cv_func_Tk_Init" >&6
+if test $ac_cv_func_Tk_Init = yes; then
+
+ echo "$as_me:$LINENO: checking if Tk library build specification is valid" >&5
+echo $ECHO_N "checking if Tk library build specification is valid... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+else
+
+ TK_BUILD_LIB_SPEC=$TK_LIB_SPEC
+ # Can't pull the following CHECKING call out since it will be
+ # broken up by the CHECK_FUNC just above.
+ echo "$as_me:$LINENO: checking if Tk library build specification is valid" >&5
+echo $ECHO_N "checking if Tk library build specification is valid... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+fi
+
+LIBS=$SAVELIBS
+
+
+
+TK_INC_DIR=$TK_INC_DIR
+
+if [[ $TK_VERSION < "8.4" ]]; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TK_84PREV
+_ACEOF
+
+fi
+
+
+
+# Check whether --with-gdal or --without-gdal was given.
+if test "${with_gdal+set}" = set; then
+ withval="$with_gdal"
+
+fi;
+
+if test "$with_gdal" != "" ; then
+ GDAL_HOME=$with_gdal
+ echo Using requested GDAL_HOME of $GDAL_HOME
+elif test "$GDAL_HOME" != "" ; then
+ echo Using predefined GDAL_HOME=$GDAL_HOME
+elif test -d ../gdal ; then
+ GDAL_HOME=`pwd`/../gdal
+ echo Found local GDAL_HOME=$GDAL_HOME
+else
+ echo "$as_me:$LINENO: checking for GDALOpen in -lgdal.1.1" >&5
+echo $ECHO_N "checking for GDALOpen in -lgdal.1.1... $ECHO_C" >&6
+if test "${ac_cv_lib_gdal_1_1_GDALOpen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgdal.1.1 $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char GDALOpen ();
+int
+main ()
+{
+GDALOpen ();
;
return 0;
}
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_func_Tk_Init=yes
+ ac_cv_lib_gdal_1_1_GDALOpen=yes
else
echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_Tk_Init=no
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_gdal_1_1_GDALOpen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_gdal_1_1_GDALOpen" >&5
+echo "${ECHO_T}$ac_cv_lib_gdal_1_1_GDALOpen" >&6
+if test $ac_cv_lib_gdal_1_1_GDALOpen = yes; then
+ gdal_found=1
+else
+ gdal_found=0
fi
-echo "$as_me:$LINENO: result: $ac_cv_func_Tk_Init" >&5
-echo "${ECHO_T}$ac_cv_func_Tk_Init" >&6
-if test $ac_cv_func_Tk_Init = yes; then
- echo "$as_me:$LINENO: checking if Tk library build specification is valid" >&5
-echo $ECHO_N "checking if Tk library build specification is valid... $ECHO_C" >&6
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+gdal_missing_msg="
+fGIS requires GDAL 1.1, but libgdal.1.1.so was not found. Please download
+and install it. See http://www.remotesensing.org/gdal/
+"
+
+ if test "$gdal_found" != "1" ; then
+ { { echo "$as_me:$LINENO: error: $gdal_missing_msg" >&5
+echo "$as_me: error: $gdal_missing_msg" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+gdal_h_missing_msg="
+fGIS requires GDAL 1.1, but gdal.h was not found. Please ensure GDAL,
+and the development include files are installed, or that you run configure
+with --with-gdal=path_to_gdal_build_tree.
+See http://www.remotesensing.org/gdal/
+"
+
+
+for ac_header in gdal.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
- TK_BUILD_LIB_SPEC=$TK_LIB_SPEC
- # Can't pull the following CHECKING call out since it will be
- # broken up by the CHECK_FUNC just above.
- echo "$as_me:$LINENO: checking if Tk library build specification is valid" >&5
-echo $ECHO_N "checking if Tk library build specification is valid... $ECHO_C" >&6
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-LIBS=$SAVELIBS
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+ if test "$ac_cv_header_gdal_h" != "yes" ; then
+ { { echo "$as_me:$LINENO: error: $gdal_h_missing_msg" >&5
+echo "$as_me: error: $gdal_h_missing_msg" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ GDAL_LIB="-lgdal.1.1"
+ LIBS="$GDAL_LIB $LIBS"
+ GDAL_INC=""
+ GDAL_INC=$GDAL_INC
+fi
+if test "$GDAL_HOME" != "" ; then
+ GDAL_LIB="-L$GDAL_HOME -lgdal.1.1"
+ LIBS="$GDAL_LIB $LIBS"
-TK_INC_DIR=$TK_INC_DIR
+ GDAL_INC="-I$GDAL_HOME/port -I$GDAL_HOME/core -I$GDAL_HOME/ogr"
-if [[ $TK_VERSION < "8.4" ]]; then
+ if test ! -d $GDAL_HOME/core ; then
-cat >>confdefs.h <<\_ACEOF
-#define TK_84PREV
-_ACEOF
+ { { echo "$as_me:$LINENO: error: Unable to find $GDAL_HOME/core directory, are you sure a
+regular GDAL build tree can be found at $GDAL_HOME?" >&5
+echo "$as_me: error: Unable to find $GDAL_HOME/core directory, are you sure a
+regular GDAL build tree can be found at $GDAL_HOME?" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ if test ! -f $GDAL_HOME/libgdal.1.1.so ; then
+
+ { { echo "$as_me:$LINENO: error: Unable to find $GDAL_HOME/libgdal.1.1.so, are you sure a
+regular GDAL build tree can be found at $GDAL_HOME?" >&5
+echo "$as_me: error: Unable to find $GDAL_HOME/libgdal.1.1.so, are you sure a
+regular GDAL build tree can be found at $GDAL_HOME?" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ GDAL_INC=$GDAL_INC
fi
-ac_config_files="$ac_config_files Makefile etc/Makefile etc/fgis.rc dll/Makefile epu/Makefile include/Makefile lib/Makefile tcl/Makefile tcl/pkgIndex.tcl"
+ ac_config_files="$ac_config_files Makefile etc/Makefile etc/fgis.rc dll/Makefile epu/Makefile include/Makefile lib/Makefile tcl/Makefile tcl/pkgIndex.tcl"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
t end
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
: end' >>confcache
-if cmp -s $cache_file confcache; then :; else
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
if test -w $cache_file; then
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
DEFS=-DHAVE_CONFIG_H
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
# configure, is in config.log if it exists.
debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
-
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
-# NLS nuisances.
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
as_unset=false
fi
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
- { $as_unset LANG || test "${LANG+set}" != set; } ||
- { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
- { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
- { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
- { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
- { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
- { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
- { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
- { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
+
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conftest.sh
- echo "exit 0" >>conftest.sh
- chmod +x conftest.sh
- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
- rm -f conftest.sh
+ rm -f conf$$.sh
fi
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
CONFIG_SHELL=$as_dir/$as_base
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$0" ${1+"$@"}
fi
rm -f conf$$ conf$$.exe conf$$.file
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
IFS=" $as_nl"
# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
+$as_unset CDPATH
exec 6>&1
} >&5
cat >&5 <<_CSEOF
-This file was extended by fGIS $as_me 0.0.1, which was
-generated by GNU Autoconf 2.53. Invocation command line was
+This file was extended by fGIS $as_me 0.0.2, which was
+generated by GNU Autoconf 2.56. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
-h, --help print this help, then exit
-V, --version print version number, then exit
+ -q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-fGIS config.status 0.0.1
-configured by $0, generated by GNU Autoconf 2.53,
+fGIS config.status 0.0.2
+configured by $0, generated by GNU Autoconf 2.56,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
--*=*)
ac_option=`expr "x$1" : 'x\([^=]*\)='`
ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- shift
- set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
- shift
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
;;
- -*);;
*) # This is not an option, so the user has probably given explicit
# arguments.
+ ac_option=$1
ac_need_defaults=false;;
esac
- case $1 in
+ case $ac_option in
# Handling of the options.
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
- exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
--version | --vers* | -V )
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
--debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
- shift
- CONFIG_FILES="$CONFIG_FILES $1"
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
- shift
- CONFIG_HEADERS="$CONFIG_HEADERS $1"
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
# This is an error.
-*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
shift
done
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
# INIT-COMMANDS section.
#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
_ACEOF
"lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
"tcl/Makefile" ) CONFIG_FILES="$CONFIG_FILES tcl/Makefile" ;;
"tcl/pkgIndex.tcl" ) CONFIG_FILES="$CONFIG_FILES tcl/pkgIndex.tcl" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"include/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/config.h" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
}
# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
+
{
- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=$TMPDIR/cs$$-$RANDOM
+ tmp=./confstat$$-$RANDOM
(umask 077 && mkdir $tmp)
} ||
{
- echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+ echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
s,@AUTOMAKE@,$AUTOMAKE,;t t
s,@AUTOHEADER@,$AUTOHEADER,;t t
s,@MAKEINFO@,$MAKEINFO,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@AWK@,$AWK,;t t
s,@SET_MAKE@,$SET_MAKE,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
s,@LN_S@,$LN_S,;t t
s,@ECHO@,$ECHO,;t t
s,@RANLIB@,$RANLIB,;t t
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
s,@LIBTOOL@,$LIBTOOL,;t t
s,@YACC@,$YACC,;t t
s,@ALLOCA@,$ALLOCA,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@POW_LIB@,$POW_LIB,;t t
-s,@FGIS_CONFIG@,$FGIS_CONFIG,;t t
+s,@FGIS_CONFDIR@,$FGIS_CONFDIR,;t t
s,@FGIS_LIBDIR@,$FGIS_LIBDIR,;t t
-s,@FGIS_SCRIPTS@,$FGIS_SCRIPTS,;t t
+s,@FGIS_SCRIPTDIR@,$FGIS_SCRIPTDIR,;t t
s,@LIBEPP@,$LIBEPP,;t t
s,@TCLHDIR@,$TCLHDIR,;t t
s,@TCLHDIRDASHI@,$TCLHDIRDASHI,;t t
s,@TK_BUILD_LIB_SPEC@,$TK_BUILD_LIB_SPEC,;t t
s,@TK_LIB_SPEC@,$TK_LIB_SPEC,;t t
s,@TK_INC_DIR@,$TK_INC_DIR,;t t
+s,@GDAL_INC@,$GDAL_INC,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
CEOF
_ACEOF
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" ||
- mkdir "$as_incr_dir" ||
- { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-done; }
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
ac_builddir=.
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
mv conftest.tail conftest.defines
done
rm -f conftest.defines
-echo ' fi # egrep' >>$CONFIG_STATUS
+echo ' fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
- if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
- { case "$ac_dir" in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" ||
- mkdir "$as_incr_dir" ||
- { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-done; }
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
rm -f $ac_file
mv $tmp/config.h $ac_file
cat $tmp/config.h
rm -f $tmp/config.h
fi
- # Run the commands associated with the file.
- case $ac_file in
- include/config.h ) # update the timestamp
-echo 'timestamp for include/config.h' >"include/stamp-h1"
- ;;
- esac
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { case $dirpart/$fdir in
- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
- *) as_incr_dir=.;;
-esac
-as_dummy=$dirpart/$fdir
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
- case $as_mkdir_dir in
- # Skip DOS drivespec
- ?:) as_incr_dir=$as_mkdir_dir ;;
- *)
- as_incr_dir=$as_incr_dir/$as_mkdir_dir
- test -d "$as_incr_dir" ||
- mkdir "$as_incr_dir" ||
- { { echo "$as_me:$LINENO: error: cannot create $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create $dirpart/$fdir" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-done; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
+ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > include/stamp-h ;;
esac
done
_ACEOF
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
- $SHELL $CONFIG_STATUS || ac_cs_success=false
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.